Qbh Custem-Made OEM ODM M6X50 Carbon Steel Zp/Yzp/Bzp/Plain/Black/HDG/Dacromet/Geomet/Nickle Plated Furniture Bed Bolt Nut Hardware Fastener Fittings

• Customization: Available
• Material: Metal
• Usage: Bed
• Condition: New
• Customized: Customized
• Transport Package: Carbon and Pallet
• Specification: M6X50
• Trademark: QBH
• Origin: China
• HS Code: 7318159001
• Production Capacity: 200 Tons/Month
• Package Size: 26.00cm * 26.00cm * 14.00cm
• Package Gross Weight: 25.000kg

Product Description

 

Product Grade

 

Class4.8 Class5.8 Class6.8 Class8.8 Class10.9 Class12.9

NO.	Mechanical or physical property		Property class
			4.6	4.8	5.6	5.8	6.8	8.8		9.8	10.9	12.9/12.9
								D≤16mma	d>16mmb	d≤16mm
1	Tensile strength Rm,Mpa	nom.c	400		500		600	800		900	1000	1200
		max.	400	420	500	520	600	800	830	900	1040	1220
2	Lower yield strength ReL,Mpa	nom.c	240	--	300	--	--	--	--	--	--	--
		max.	240	--	300	--	--	--	--	--	--	--
3	Stress at 0,2 % nonproportional elongation Rp0.2,Mpa	nom.c	--	--	--	--	--	640	640	720	900	1080
		max.	--	--	--	--	--	640	660	720	940	1100
4	Stress at 0,0048 d non-proportional elongation for full-size fasteners Rpf,Mpa	nom.c	--	320	--	400	480	--	--	--	--	--
		max.	--	340e	--	420e	480e	--	--	--	--	--
5	Stress under proof load Spf,Mpa	nom.	225	310	280	380	440	580	600	650	830	970
	Proof Sp,nom/ReL min Or strength Sp,nom/Rp0.2min Or rati Sp,nom/Rpf min		0.94	0.91	0.93	0.9	0.92	0.91	0.91	0.9	0.88	0.88
6	Percentage elongation after fracture for machined test pieces,A,%	min.	22	--	20	--	--	12	12	10	9	8
7	Percentage reduction of area after fracture for machined test pieces,Z,%	min.	--					52		48	48	44
8	Elongation after fracture for full-size fasteners,Af	min.	--	0.24	--	0.22	0.2	--	--	--	--	--
9	Head soundness		No fracture
10	Vickers hardness, HV, F≥98N	min.	120	130	155	160	190	250	255	290	320	385
		max.	220g				250	320	335	360	380	435
11	Brinell hardness, HBW ,F=30D²	min.	114	124	147	152	181	238	242	276	304	366
		max.	209g				238	304	318	342	361	414
12	Rockwell hardness,HRB , HRB	min.	67	71	79	82	89
		max.	95g				99.5
	Rockwell hardness, HRC	min.	--					22	23	28	32	39
		max.	--					32	34	37	39	44
13	Surface hardness HV 0.3	max.	--					h			h,j	h,j
14	Height of non-decarburized thread zone,E,mm	min.	--					1/2H1			2/3H1	3/4H1
	Depth of complete decarburization in the thread,G,mm	max.	--					0.015
15	Reduction of hardness after retempering,HV	max.	--					20
16	Breaking torque, MB,N·m	min.	--					in accordance with ISO 898-7
17	Impact strength, KVK,I,J	min.	--		27	--		27	27	27	27	m
18	Surface integrity in accordance with		ISO 6157-1n									ISO 6157-3
a Values do not apply for structural bolting. b For structural bolting d W M12. c Nominal values are specified only for the purpose of the designation system for property classes.See Clause 5. d In cases where the lower yield strength ReL cannot be determined, it is permissible to measure the stress at 0,2 % non-proportional elongation Rp0,2. e For the property classes 4.8, 5.8 and 6.8 the values for Rpf min are under investigation. The present values are given for calculation of the proof stress ratio only. They are not test values. f Proof loads are specified in Tables 5 and 7. g Hardness determined at the end of a fastener shall be 250 HV, 238 HB or 99,5 HRB maximum. h Surface hardness shall not be more than 30 Vickers points above the measured core hardness of the fastener when determination of both surface hardness and core hardness are carried out with HV 0,3. i Any increase in hardness at the surface which indicates that the surface hardness exceeds 390 HV is not acceptable. j Any increase in hardness at the surface which indicates that the surface hardness exceeds 435 HV is not acceptable. k Values are determined at a test temperature of −20 °C, see 9.14. l Applies to d W 16 mm. m Value for KV is under investigation. n Instead of ISO 6157-1, ISO 6157-3 may apply by agreement between the manufacturer and the purchaser.

 

Materials and Chemical compstition

1008

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Al
0.06	0.06	0.33	0.013	0.003	0.01	0	0.01	0.028

 

 

1035

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.34	0.13	0.73	0.012	0.002	0.02	0.01	0.02

 

 

10B21

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	B
0.2	0.04	0.81	0.017	0.007	0.017	0.0021

 

 

1045

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.45	0.23	0.58	0.014	0.006	0.057	0.008	0.016

 

40CR

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.4	0.21	0.54	0.015	0.008	0.95	0.02	0.02

 

35CRMO

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Mo
0.35	0.22	0.59	0.01	0.003	0.93	0.01	0.01	0.21

 

 

42CRMO

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu	Mo
0.42	0.27	0.92	0.013	0.004	1.01	0.03	0.04	0.2

 

 

Finish

 

PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON

 

 

 

 

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

 

QBH SMALL PACKING

Packing in small boxes according to customer's requirements

Packing in plastic bag according to customer's requirements

 

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

 

 

The advantages of QBH

• QBH brand sales to the main quality assurance.
• Years of export trade management, excellent service, word-of-mouth guarantee.
• By working with TUV,escort for quality.
• Customization of non-standard parts can be made according to customer's requirements and drawings.
• For quality customers,we can provide a certain credit period.