Qbh Heavy Hex Bolts Heavy Hex Nuts A325m+A563m+F436m+F959m M22X100 Dacromet

• Standard: ANSI
• Material: Medium Carbon Steel
• Connection: Female
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: QBH-A325m+A563m+F436m+F959m M22X100
• Surface Treatment: Dacromet
• Head Type: Hexagon
• Transport Package: 25kgs/Box, Bulk in Pallet
• Specification: M12-M36
• Trademark: QBH
• Origin: China
• HS Code: 73181500
• Production Capacity: 400tons/Month
• Package Size: 26.00cm * 26.00cm * 14.00cm
• Package Gross Weight: 25.000kg

Product Description

ASTM Standards

A153/A153M Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A563M Specification for Carbon and Alloy Steel Nuts (Metric)

A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

B695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

D3951 Practice for Commercial Packaging

F436M Specification for Hardened Steel Washers (Metric)

F606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners,
Washers, and Rivets (Metric)

F788/F788M Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

F959M Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)

F1136M Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners (Metric)

F1470 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

F1789 Terminology for F16 Mechanical Fasteners

G101 Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

ASME Standards

B1.13M Metric Screw Threads

B18.18.3M Inspection and Quality Assurance for Special Purpose Fasteners

B18.2.3.7M Metric Heavy Hex Structural Bolts

B18.24 Part Identifying Number (PIN) Code System Standard for B18 Fastener Products

 

 

This specification covers two types of quenched and tempered, steel, metric heavy hex structural
bolts having a minimum tensile strength of 830 MPa (Note 1).

 

Formerly under the jurisdiction of Committee F16 on Fasteners, this specification was withdrawn
in May 2016 and replaced by Specification F3125/F3125M for High Strength Structural Bolts, Steel
and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength,
Inch and Metric Dimensions. Specification F3125/F3125M supersedes and replaces specifications;
A325, A325M, A490, A490M, F1852 and F2280. The unified Specification F3125/F3125M corrects
known inconsistencies in the original documents and the combination will assure that requirements
of the products covered under the original standards stay aligned.

 

 

 

 

 

A563M  Specification

 

ASTM A563M Heavy Hex Nuts (Metric) for use with ASTM A325M Bolts

 

 

This ASTM A563 and ASTM A563M heavy hex nuts specification covers chemical and
mechanical requirements for eight property classes of hex and hex-flange carbon and
alloy steel nuts for general structural and mechanical uses on bolts, studs, and other
externally threaded parts.

 

Note 1: Throughout this specification, the term class means property class.

 

Note 2: Requirements for the four classes 5, 9, 10, and 12 are essentially identical with
requirements given for these classes in ISO 898/II. Requirements for Classes 8S and
10S are essentially identical with requirements in an ISO 4775 Hexagon Nuts for
High-Strength Structural Bolting with Large Width Across Flats, Product Grade B, Property
Classes 8 and 10. Classes 8S3 and 10S3 are not recognized in ISO standards.

 

1.2 Classes 8S3 and 10S3 nuts have atmospheric corrosion resistance and weathering
characteristics comparable to those of the steels covered in Specification A 588/A 588M.
The atmospheric corrosion resistance of these steel's substantially is better than that of
carbon steel with or without copper addition. and when properly exposed to the atmosphere,
these steels can be used bare (un-coated) for many applications.

 

1.3 The nut size range for which each class is applicable is given in the table on mechanical requirements.

 

 

Notes:

1. The nuts will generally conform to ANSI B18.2.4.1M - Metric Heavy Hexagonal Nuts

2. Thread will conform to class 6H of ANSI B1.13M for Coarse Series

3. Material & Heat Treatment: To achieve mechanical properties of Properties Class 8S or 10S of ASTM
A563M.

4. Nuts of Property Class 8S are used with bolts of ASTM A325M - Type 1 (uncoated). Nuts of Property
Class 10S are used with bolts of ASTM A325M - Type 1(Zinc- coated) (in general nuts of a higher
property class can replace nuts of a lower property class in a joint).

5. In Bolt/Nut assembly, tightening should be done by rotation of nut.

6. Sizes in brackets are non preferred standards.

7. All dimensions are in millimeters.

 

 

A563M Nut Dimension Classes 8S & 10S

 

Nominal size and thread pitch d	S		E		M		dw	C		Total runout of bearing surface
	Width across flats		Width across corners		Thickness		Bearing face diameter	Washer face thickness
	max	min	max	min	max	min	min	max	min	max
M16 x 2	27	26.16	31.18	29.56	17.1	16.4	24.9	0.8	0.4	0.47
M20 x 2.5	34	33	39.26	37.29	20.7	19.4	31.4	0.8	0.4	0.58
M22 x 2.5	36	35	41.57	39.55	23.6	22.3	33.3	0.8	0.4	0.63
M24 x 3	41	40	47.34	45.2	24.2	22.9	38	0.8	0.4	0.72
M27 x 3	46	45	53.12	50.85	27.6	26.3	42.8	0.8	0.4	0.8
M30 x 3.5	50	49	57.74	55.37	30.7	29.1	46.6	0.8	0.4	0.87
M36 x 4	60	58.8	69.28	66.44	36.6	35	55.9	0.8	0.4	1.05

 

 

 

Process flow

 

Cold forging

Annealing treatment(if need)  wiredrawing clod forging thread rolling make heat treatment  Finish  Packing

 

Hot forging

Cutting material  hot forging  turning  shrink diameter(half thread) thread rolling  make heat treatment  Finish  Packing

 

 

Product Grade

 

Grade 8S Grade 10s

 

Materials and Chemical compstition

 

1035

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.34	0.13	0.73	0.012	0.002	0.02	0.01	0.02

 

 

1045

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.45	0.23	0.58	0.014	0.006	0.057	0.008	0.016

 

40CR

CHEMICAL COMPOSI %
C	Si	Mn	P	S	Cr	Ni	Cu
0.4	0.21	0.54	0.015	0.008	0.95	0.02	0.02

 

Finish

 

PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON

 

 

PACKING

 

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

 

QBH SMALL PACKING

Packing in small boxes according to customer's requirements

Packing in plastic bag according to customer's requirements

 

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

 

 

The advantages of QBH

• QBH brand sales to the main quality assurance.
• Years of export trade management, excellent service, word-of-mouth guarantee.
• By working with TUV,escort for quality.
• Customization of non-standard parts can be made according to customer's requirements and drawings.
• For quality customers,we can provide a certain credit period.
   

 

General:

 

In brief Type 3 grade A325 bolts shall be marked "A325" to distinguish them from standard 
grade A325s. Likewise Grade A490 bolts are available in diameters from 1/2 to 1-1/2 inch
diameters with a minimum tensile strength of 150,000 PSI for all diameters, and are offered
in two types.

In Fact ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile
Strength. It defines
mechanical properties for bolts that range from ¹⁄₂ to 1 ¹⁄₂ inches (13 to 38 mm) in diameter.

In accordance with ASTM A325, all threaded components of the fastener assembly must be 
galvanized by the same process and the supplier's option is limited to one process per item
with no mixed processes in a lot.

 

 

This Specification deals principally with two strength grades of high-strength
bolts, ASTM A325 and A490, and with their design, installation and inspection in
structural steel joints. Equivalent fasteners, however, such as ASTM F1852
(equivalent to ASTM A325) twist-off-type tension-control bolt assemblies, are
also covered. These provisions may not be relied upon for high-strength fasteners
of other chemical composition, mechanical properties, or size. These provisions do
not apply when material other than steel is included in the grip; nor are they
applicable to anchor rods.
This Specification relates only to the performance of fasteners in structural
steel joints and those few aspects of the connected material that affect this
performance. Many other aspects of connection design and fabrication are of equal
importance and must not be overlooked. For more general information on design
and issues relating to high-strength bolting and the connected material, refer to
current steel design textbooks and the Guide to Design Criteria for Bolted and
Riveted Joints, 2 nd Edition (Kulak et al., 1987).

 

Certifications & Packaging

FAQ

Our Services

Professional Manufacturer: All of our Fastener are designed and manufactured according to buyers'
specification and performance.
Quality is guaranteed: Durability testing and critical technical design to enhance fasteners lifetime.
Cost effective: Competitive prices with professional factory supply
Perfect fastening solution with 15+ years experiences to solve your problem: Wide range of parts selection.
Customized Ideal Fasteners: customized services according to the samples and drawings offered.

Free Samples for Standard Fastener from Jiaxing City Qunbang Hardware
We Promise:
1.High quality
2. Competitive price
3. The shortest delivery
4. The fastest response
5. The best service

FAQ
1.What's your experience like?

Our general manager has been engaged in the export of fasteners since 2005.
Our team can provide you with professional fasteners selling and smooth export services.

2.How about your price?
High quality products with reasonable price. Please give me a inquire, We will quoted you a price for you
refer at once.

3. How do you control your quality?
We require the quality control department to inspect every production link of each shipment. And we can provide you MTC and mill certificate when the goods is finished.

4.How about your delivery time?
General speaking, if the goods is in stock, we can delivery them with 2-5days, If the quantity is 1-2container, we can give you with 18-25days,if the quantity is more than 2 container and you are very urgent, we can let factory priority produce
your goods.

5.What is your packing?
Our packing is 20-25kg for one carton,36 or 48pcs cartons for one pallet. One pallets is about 900-960kg, We also can make customer's logo on the cartons. Or we customized cartons according to customers'
requirement.

6.What is your payment term?
We can accept T/T,LC for general order ,Paypal and Western union for small order or samples order.


Awaiting for your kind inquiry! Thanks & best regards!

For more information: http://qbfastener.en.made-in-china.com